Inspecting Tower Crane Temporary Devices
Overview
On any given job site, there are often various activities taking place alongside crane operations. As a result, there may be temporary signage, structures, and lights attached to tower cranes. Although these devices are not included in regular tower crane inspections, they must be checked regularly to ensure everything is in proper working condition and will not become a safety hazard. The following is an inspection checklist for temporary devices that may be found on a job site.
Checklist
Item
-
1.
Work task lights are functioning properly and attached securely to the jib or mast
-
2.
Aeronautic warning lights are functioning properly and attached securely
-
3.
Advertising signage is fastened securely
-
4.
Placards used to identify cranes on a multi-crane site are legible and fastened securely
-
5.
Limits of approach jib markers are legible and fastened securely
-
6.
Holiday decorations and flags are attached securely and are not a tripping hazard
-
7.
Anti-collision devices are functioning
-
8.
Hoarding at the base of the crane is braced and secured, and "ACCESS RESTRICTED" signs are legible
-
9.
Access platforms from the building to the mast of the crane are installed safely and free of debris
-
10.
Wedges in the slab opening are in place and secure
-
11.
Warning indicators for high voltage systems are legible and attached securely
-
12.
Load weighing devices are periodically tested as required by the manufacturer
-
13.
Crane load camera is mounted securely
Information in this document is considered accurate at the time of publication. Please contact BC Crane Safety - Publications Review with any questions or recommendations for content revision. Please refer to WorkSafeBC for current copies of the Workers Compensation Act and Occupational Health and Safety Regulation (OHSR).
